USB 3.0 ports on PC Right-click the Windows icon (bottom left) and select Device Manager. In the Device Manager window, select Universal Serial Bus controllers. Locate the USB port by its type (e.g. 3.0, 3.1). If there are not 3.0 or above ports, your computer is not USB 3 enabled. . . . Read more

How to Fix USB Port Issues Restart your computer. … Look for debris in the USB port. … Check for loose or broken internal connections. … Try a different USB port. … Swap to a different USB cable. … Plug your device into a different computer. … Try plugging in . . . Read more

How to Reset a Bootable USB: Step by Step Plug your flash drive into your PC’s USB port. Open Command Prompt on your PC. … Type the command "diskpart" and press Enter. … Type the command "list disk" and press Enter. … Determine which disk is your USB drive by . . . Read more

How To Fix a Plugged-In USB Drive Not Showing Up Preliminary checks. Check for device compatibility. Update your operating system. Windows Troubleshooter tool. Use Disk Management tool. Try plugging into a different computer or USB port. Troubleshoot drivers. Use Device Manager to scan for hardware changes.

Windows may be missing other important updates hardware or software issues. Your USB controllers may have become unstable or corrupt. Your external drive may be entering selective suspend. Your PC motherboard may need updated drivers.

Turns out it’s pretty easy to add USB 3.0 ports to a desktop, provided you can meet two simple requirements. First, your system will need an available PCI or PCI Express expansion slot. Second, you’ll need $20-30 you can devote to the upgrade.

The USB device may become unresponsive because of a race condition in the Selective Suspend feature. The Selective Suspend feature suspends the USB device to efficiently maintain battery power by enabling the computer to turn off the USB device. However, sometimes this feature may not correctly wake up the USB . . . Read more

1:356:06How to Fix Corrupted USB Flash Drive and Recover Data? – YouTubeYouTube

Turn on the computer. On the SONY screen, press and hold the F8 key for 7-10 seconds. NOTE: If a Please Select Boot Device window appears, press the ESC key, then press the F8 key. On the Windows Advanced Options Menu screen, press the UP ARROW key until Enable VGA . . . Read more

Here are some steps to take: Turn off your computer and monitor. Unplug their power cables. Wait a few minutes. Afterwards, reconnect the VGA cable to the computer and monitor. Plug the power cable back, too. Turn on your computer and monitor and see if the VGA connection works just . . . Read more